A barcode that scans at the label printer is not the same as one that scans at a retail distribution centre. Between those two points sit the carton, the pallet, and a receiving dock that will reject a pallet over one unreadable symbol. This article covers who owns each mark, where it is applied, and what a carton must carry before it leaves the factory.
Who Applies for the GTIN
The brand owner, not the factory. A GTIN is issued through GS1 in the country where the brand is registered, and it identifies the company that owns the product record — not the company that filled the jar. A factory that offers to “supply barcodes” is usually reselling a number registered to someone else, and that number will resolve to the wrong company in every retail database that reads it.
Two consequences follow. Apply for the numbers before artwork is finalised, because the barcode sits inside the label file and changing it later restarts the print proof. And keep the GTIN list in your own records: factories change, and the product record has to outlive the supplier relationship.
Which Level Gets Which Code
Three levels get marked, and confusing them is the most common reason a shipment cannot be received.
- Unit level — the retail barcode on the jar or carton, one GTIN per sellable variant. A different fragrance is a different GTIN; a different fill size is a different GTIN. Our own catalogue follows the same rule rather than bundling scents as options: the lavender fragrance spray and the rose body and hair mist are separate items with separate records, not two options on one page.
- Inner pack — only if the inner pack can be sold on its own. If it cannot, it does not need a retail symbol, and adding one creates a number that will eventually be scanned by mistake.
- Outer carton — a logistics label, not a retail barcode. It carries your item code, quantity, batch, production date, and dimensions.
If you are still deciding how many variants to launch, the number of GTINs you need is a direct output of that decision; our article on how many SKUs a first year needs works through the arithmetic.
Where the Label Goes in the Process
There are two routes, and the choice is made at quoting stage, not at shipping stage.
Printed inline. The barcode is part of the label artwork, printed with everything else. Cheapest per unit and the least likely to be misapplied. It requires the GTIN to be locked before the print run, and any change afterwards means reprinting labels, not reprinting stickers.
Applied after filling. Printed separately, then applied by hand or machine. This suits short runs and work where one base product goes into several brands, but it adds a step where the wrong label can reach the wrong batch. Ask what happens to partly used label rolls at the end of a run.
Either way the check is the same and costs nothing: scan the first finished unit, one from the middle of the run, and the last. A failure on the third scan usually means the print head, not the artwork.
What a Carton Mark Must Carry
A carton mark is read by people, not scanners, and it is read in a warehouse where the person holding the box has no other information. The minimum set:
- Product name and variant, in the same wording as the artwork
- Item code and GTIN, if the carton is also the retail unit
- Quantity per carton, stated as units rather than pairs or sets
- Batch or lot number, matching the number inside the unit labels
- Production date and, where the category requires it, a best-before date
- Gross weight and carton dimensions
- Country of origin
- Handling symbols only where they are true — a fragile symbol on a carton that ships fine on a pallet trains people to ignore the symbol
The batch number matters most and is the field most often missing. Without it, a complaint about one jar cannot be traced to the run that produced it. For the fields on the unit itself, see what must appear on a cosmetic pack.
Mixed Cartons or Single-SKU Cartons
A mixed carton holds more than one variant; a single-SKU carton holds one. Mixed cartons reduce the number of cartons in a small order and make a launch assortment possible without ordering a full carton of each shade. They also slow down receiving, because every carton has to be opened and each variant counted.
The rule that works: mixed for your own warehouse or a distributor’s, single-SKU for anyone receiving onto a retail fixture. Ask before the run, because the answer changes the carton mark, the packing list, and often the dimensions.
Barcode Placement and Readability
Placement rules exist because scanners read at an angle, through plastic, under warehouse lighting: keep the symbol on a flat surface, clear of a seam, with a quiet margin so a dark edge does not read as one long bar.
Colour matters: dark bars on a light background, never the reverse. A barcode reversed out of a coloured label photographs correctly and fails at the scanner, so keep a white panel behind the symbol.
A Checklist Before You Approve the Proof
- GTIN registered to your company, not the factory’s
- One GTIN per sellable variant, no reuse across sizes or fragrances
- Barcode printed inline or applied after filling — decided and written into the quote
- Scan test on first, middle, and last unit of the run
- Carton mark carries batch, quantity, weight, dimensions, and origin
- Mixed or single-SKU confirmed with the buyer before the run
- White panel behind the symbol if the label is coloured
If you are preparing a run and want the marking step quoted alongside filling and packing, our private label page sets out what the factory needs from you, and the wholesale FAQ covers minimum quantities per SKU. Buyers comparing suppliers can also read how our production is set up.
Leave a Reply