Category: Brand Journal

FATAZEN editorial stories about thoughtful personal-care routines, brand principles and everyday self-care.

  • What a Certificate of Analysis Tells You, and Where It Stops

    A certificate of analysis is the document most often requested and least often read. Buyers ask for it to confirm a supplier is serious; they then file it without checking whether it describes the batch they actually received. This note explains what a COA covers, what it cannot cover, and the four checks that take a minute and catch most of the problems.

    What a COA is

    A COA records the results of tests run on one batch of one product, against a specification agreed beforehand. It is a batch document, not a product certificate. Two COAs for the same SKU six months apart should look similar in format and can differ in values — that is normal, and it is the point: the document describes that batch, not the product in general.

    What it normally contains

    • Product name and internal code, matching the specification sheet.
    • Batch or lot number, plus manufacturing and expiry (or period-after-opening) dates.
    • Appearance and odour, described against a reference.
    • Identity and physical values: pH, viscosity or hardness, specific gravity where relevant.
    • Microbiological results: total aerobic count, yeast and mould, and absence of specified organisms.
    • Heavy metals, where the specification sets limits.
    • Net fill or weight check, if the batch record includes it.
    • The specification limits beside each result, and a pass or fail conclusion.

    What it does not tell you

    A COA does not prove stability. It is a snapshot taken at release, so it says nothing about what the formula does after twelve months, after a cold winter in a warehouse, or in contact with the pump it is packed in — that is stability and compatibility testing, a separate exercise with its own report.

    It also does not describe the packaging, the fill line accuracy across the run, or how the batch was stored before shipment. And it is not a certificate that the product is safe or approved: it is an internal release record, issued by the manufacturer’s quality function, not by a regulator.

    Four checks worth doing

    1. Does the batch number match the cartons? Read the number printed on the box or the label, not the one in the email. A COA that does not match the shipment is a document for a different batch.
    2. Are the limits shown, not just the results? A number without a specification cannot be judged. A pH of 5.4 is good or bad only against a stated range.
    3. Is the micro section complete? Total count alone is not enough; yeast and mould, and the absence of specified organisms, are what most specifications actually require.
    4. Is the date plausible? Manufacturing date before the shipment date, expiry consistent with the shelf life in the specification. A COA dated after the goods arrived is a document written to satisfy an audit.

    Who issues it, and for how long it is kept

    The manufacturer issues it, and it should be traceable to a batch record: who made the batch, on which line, with which raw material lots. Retention periods differ by market, but as a buyer the practical question is whether a COA can be produced for a batch shipped eighteen months ago. Ask that before the first order rather than after a complaint.

    What to ask for alongside it

    A COA on its own is thin. The useful bundle is the COA for the batch, the specification sheet it was tested against, the safety data sheet for transport, and — where the market requires it — the responsible person or facility registration details. For how those documents divide between factory and brand, see the private label overview; for preparation windows and terms, see the wholesale FAQ.

    Three formats that should make you ask a question

    First, a COA that is a photograph of a signed page with no batch number readable: it may be genuine, but it cannot be checked against the cartons, which removes its only practical use. Second, a COA where every value sits exactly at the target rather than inside a range — real batches vary, and a document showing no variation usually means the limits column was filled in afterwards. Third, a COA covering several batches on one page: acceptable as a summary, not as a release document for the batch in front of you.

    None of these is proof of a problem. Each is a reason to ask for the batch record before the next order, when asking is still cheap.

    Where to look next

    A FATAZEN example from the range: FATAZEN Kojic Acid Body Lotion — Daily Moisturizer for Dry Skin 250ml is quoted per SKU like every other line in this article.

  • Who Owns Packaging Artwork Approval: Brand, Factory or Printer?

    Most packaging problems are not printing problems. They are approval problems: a file was approved by someone who was not authorised to approve it, a change was approved in a chat message, or a reprint was triggered by something nobody had classified as a change. This note sets out who approves artwork, what counts as a change, and where the cost of an error usually lands.

    Artwork is not the mockup

    The mockup is the image used to sell the idea. Artwork is the print file built on the supplier’s dieline: the exact shape of the tube, jar or carton, with bleed, safe margins, colour separation and the barcode placed where the scanner can read it. Approving a mockup and calling the artwork approved is the most common source of reprints, because a mockup does not carry bleed, does not show text at final size, and does not test whether the barcode scans.

    Three approvals, not one

    Each side signs a different question, and none of them can be skipped.

    • Brand approval — does the pack say what we intend, legally and commercially: product name, net quantity, ingredient list in the required order, batch and expiry coding, warnings, importer details.
    • Factory approval — can this actually be printed and applied: minimum type size, colour count, material compatibility, whether the label survives a filling line, whether the dieline matches the component currently in stock.
    • Printer approval — will this file reproduce as intended: trapping, overprint, Pantone versus process builds, and how the chosen substrate shifts the colour.

    A single “approved” covering all three is how a legally complete file ends up printed in the wrong colour, or a beautiful file arrives with a barcode that will not scan.

    One named signatory per side

    Approval needs a person, not a committee. Name one signatory on the brand side and one on the supplier side in the purchase order, and accept approval only from those two addresses. A message from a colleague who is helpful but not named is not an approval, and in a dispute it will not be treated as one. Each approval should reference a version number and a date, and the approved file should be archived with the message that approved it.

    What counts as a change

    Reprints are usually caused by changes that were treated as small. Any of the following restarts the approval cycle, because each one alters either the legal text or the print setup:

    • Any change to wording, including punctuation and net quantity.
    • A different product name, variant or fragrance name.
    • A change of substrate, finish or colour count.
    • A component swap: pump to cap, tube to airless, carton to shrink sleeve.
    • A new barcode, or a barcode moved to a different panel.
    • A change of importer or responsible entity, which changes the address block.

    Treating a wording change as a typo fix is the single most expensive habit in packaging. The plate or digital setup is already committed at that point, and the cost of the change is real whether or not it is charged back.

    Proof rounds and what each one shows

    A soft proof is a PDF and shows layout, text and dimensions. A hard proof is a physical print and shows colour on the chosen substrate. A press proof is taken off the production run and shows what the line actually produces. Approve layout at soft proof, colour at hard proof, and treat the press proof as the reference sample for the batch.

    Sign off on a screen and you are approving a light-emitting display, not ink on material. Two monitors showing the same file will not agree, and neither will match the printed result.

    Who holds the print-ready file

    Ownership matters at reorder, not at first order. Establish before the first run whether the brand receives the layered artwork, the fonts used, and the dieline, or only a flattened PDF. A flattened file is enough to reprint with the same supplier and not enough to move supplier, adjust a claim, or add a market-specific address block without commissioning the design again.

    Checks before the file leaves the brand side

    • Net quantity on the artwork matches the fill weight in the specification, not the previous product’s weight.
    • Ingredient list order matches the formula version being produced.
    • Barcode scans from a printed proof, not from a screen.
    • Batch and expiry fields have a defined position that the coding equipment can reach.
    • The address block names the entity that is legally responsible in that market.
    • The version number on the file matches the version number in the approval message.

    For the elements that must appear at all, see label compliance. For how a physical sample is signed off against that artwork, see sample approval. For trade terms on reprints and preparation windows, see wholesale FAQ.

    Where the cost lands

    Most suppliers treat errors in approved artwork as the brand’s cost, and errors in print execution as their own. That split only works if approval is documented. Without a versioned file and a named signatory, every reprint becomes a negotiation, and the supplier’s goodwill — not the contract — decides who pays.

    Where to look next

    If you are handing a print file to a factory for the first time, the order of sign-offs and who owns each one is set out in the private label process.

    A FATAZEN example of this in practice: FATAZEN Floral Hand Cream — Tube Format with a Light Scent Profile.

  • Verifying Where a Factory Actually Is: Address, Licence and Audit

    Three documents are usually offered to prove a factory exists where it says it does: a business licence, a photograph of the building, and a video call. They answer different questions, and treating any one of them as sufficient is how buyers end up paying a trading company at factory prices.

    This note sets out what each check actually establishes, in the order that costs the least to run.

    Start with the licence, but read two addresses on it

    A Chinese business licence carries a registration address and a unified social credit code. The code is the useful part: it can be looked up in the national enterprise credit system, which returns the company name, registered capital, establishment date, business scope and any abnormal operating status.

    Two things are commonly misread. First, the registration address and the production address are often not the same building — a sales office in a commercial tower and a plant in an industrial zone is normal, not suspicious. Second, the licence does not list production capacity. It tells you the entity is legally alive and what it is allowed to do; it does not tell you whether the filling line exists.

    Then check the production address on a map, at street level

    Satellite imagery answers one narrow question well: is this address a building of the right kind and size, in an area zoned for manufacturing? A plant address that resolves to a residential block or a bare field is a hard stop. Street view, where coverage exists in the industrial suburbs around Guangzhou, shows signage, loading bays and truck access.

    What imagery cannot tell you is whether the company you are talking to occupies that building. Warehouses and industrial parks host many tenants, and a shared address is common. This is where the video call earns its place.

    Use the video call to see the line, not the lobby

    A useful walk-through is unscripted and specific. Ask to see the filling line running, the label applicator loaded, and the batch record being filled in for a production run. Ask the operator to hold a sheet of paper with today’s date and your company name into frame — it is a crude test, but staged footage rarely passes it.

    Three details separate a real plant from a showroom tour. Equipment should look used: wear on the conveyor, boxes of components stacked at the line, a QC bench with instruments plugged in. The person answering technical questions should be a production or quality lead rather than a salesperson reading a spec sheet. And the time of day should match the shift pattern they described — an empty floor at 10am on a Tuesday needs an explanation.

    Ask what cannot be photographed

    Some of the strongest signals are questions rather than images. Which products ran on the line this week, and can you see the changeover record? Who signs the batch record, and how many people hold that signature? What happens to a batch that fails micro testing — where is it held before disposal? A trading company can forward these questions; only a plant can answer them with specific paperwork.

    The same logic applies to documentation. Batch records, COAs and stability reports should carry the production site, not just the brand. A distributor document pack is worth reading with that in mind: what is listed as factory-held should be traceable to one address.

    When to pay for a third-party audit

    For a first order at moderate volume, the three checks above are usually enough, and they cost nothing but time. An on-site audit by a third party earns its fee in three situations: the order is large enough that a failed batch matters more than the audit cost, the product is going into a regulated market where the production site will be inspected anyway, and the relationship is new enough that no paperwork has been tested under load.

    An audit should confirm the site address against the licence, walk the line, and sample records rather than accept a binder prepared for the visit. If a supplier resists a site visit while offering to courier documents instead, that preference is itself data.

    What this looks like in practice

    Our own site sits in Huadu District, Guangzhou, near the airport, with a factory floor of 1,000–3,000 m² and a separate office of over 2,000 m². The company entity was registered in 2023 and employs 51–100 people, including dedicated R&D and QC staff. Those numbers are checkable, and they are on our factory page precisely so they can be checked rather than taken on trust.

    If the volume, MOQ and lead-time terms matter more than the address at this stage, the wholesale FAQ covers those directly. For buyers comparing several sites, the note on why the Guangzhou cluster matters explains how geography affects component lead times.

    Where to look next

  • Selling Cosmetics in the US: MoCRA Registration and Label Rules

    Since 2022 the United States has had a federal framework for cosmetics that looks more like the European one than the previous arrangement did. For buyers entering the US market, the practical effect is a set of filings and named responsibilities that exist independently of whether the product is imported or made domestically. This note sets out what the framework requires, in the order a first order usually meets it.

    What changed, in one paragraph

    Cosmetics in the US are still not subject to pre-market approval. What the 2022 amendments introduced is registration and listing, a named responsible person, mandatory adverse event reporting, and a route to mandatory good manufacturing practice. In other words: the product does not need a licence to be sold, but the facility and the product have to be on file, and someone has to be answerable.

    Facility registration

    Facilities that manufacture or process cosmetic products for US distribution must register with the FDA, and the registration has to be renewed on a two-year cycle. The registration identifies the facility and its operations; it is not an approval of anything the facility makes.

    Two practical points come up on first orders. Registration sits with the facility that manufactures or processes the product, not with the brand that sells it — so a brand importing from a contract manufacturer is relying on that manufacturer’s registration. And where a facility changes ownership or address, the registration has to follow the change rather than being left in the previous holder’s name.

    Product listing

    Each cosmetic product must be listed, with the responsible person identified and the product’s ingredients disclosed to the FDA. Listings are updated annually, and a new product needs a listing before or as it enters distribution rather than at some later convenience.

    This is the step most often confused with the European notification. They are not the same filing, and satisfying one does not satisfy the other. The EU route is described in what an EU distributor must hold; a product sold in both markets needs both.

    The responsible person

    The framework requires a named responsible person for each product — an entity with a US address that carries the obligations attached to it, including responding to FDA requests and maintaining records. For an imported product this is normally the US-based brand owner or importer, not the overseas factory.

    This is the point where a supply relationship has to be explicit. A factory can supply documentation, but it cannot be the US responsible person for a brand it does not own. Buyers who assume the factory handles it usually discover otherwise at the point of a listing or an adverse event, which is the worst moment to discover it.

    Adverse event reporting and records

    Serious adverse events associated with a cosmetic product must be reported to the FDA within 15 business days of the responsible person becoming aware of them, with follow-up reporting for new information. Records supporting those reports have to be kept and made available on request.

    In practice this means the brand needs a route for consumer complaints that reaches a person able to judge seriousness, and it needs the batch and distribution information to trace a complaint back to a lot. That is a records design question, not a paperwork question, and it is easier to set up before the first shipment than after the first complaint.

    Good manufacturing practice

    The FDA has been developing mandatory GMP requirements for cosmetics, which for the first time would make manufacturing practice a regulatory obligation rather than a voluntary standard. Until those requirements take effect, the practical position for a buyer is unchanged: ask what standard the facility works to and ask for evidence of it. Our own facility documentation is described on the private label page, and the commercial questions — quantities, preparation time, terms — are covered in the wholesale FAQ.

    What the framework does not do

    It does not create a pre-market approval, and it does not license the word “approved”. Saying a cosmetic is FDA approved is a misstatement regardless of how the registration and listing were handled — the filings are registrations, not approvals. This is worth stating plainly because it appears in supplier marketing material often enough that buyers begin to believe it.

    It also does not replace labelling rules. Ingredient declaration, net quantity, product identity, and the name and address of the party responsible all still apply, and the US does not require the European period-after-opening symbol or a mandatory durability date in the same way. The elements themselves are set out in what must appear on a cosmetic pack.

    Smaller businesses should check whether they fall within the exemption thresholds for registration and listing, which carry conditions and do not apply to every product category. The exemption is narrow in practice and is not a reason to skip the responsible person question.

    Who holds what on a private label order

    Split the work before the purchase order, not after it. The factory side holds the site registration, the quality system audit, batch records, a certificate of analysis per batch, the quantitative formula and the INCI list. That document set is described on the factory page, and first-order terms are on the wholesale FAQ.

    The brand side holds the responsible person role, the product listing, the adverse event file, the US agent arrangement where a foreign facility needs one, and the final label approval. If you are building the brand rather than buying wholesale, the split is set out under private label; if you are distributing an existing brand, start at the distributor pages, including the regional page for Europe where shipments are split between markets.

    A short checklist for a first US order

    • Which facility manufactures, and is its registration current?
    • Who is the responsible person, with a US address?
    • Has the product been listed, and when is the annual update due?
    • Who receives consumer complaints, and how is seriousness judged?
    • Can a complaint be traced to a batch and a distribution list?
    • Does any label or marketing text say “FDA approved”?

    None of these are difficult to answer once someone owns them. The cost of leaving them unanswered is not a fine on day one — it is discovering at the first complaint that nobody can produce the record.

    Related reading

  • Where Chinese Skincare Is Manufactured, and Why It Matters

    “Made in China” describes an origin, not a supply chain. For skincare it is more useful to ask which cluster, because the cluster determines what a factory can source locally, how fast a component can be replaced, and which port the pallet leaves from. Those three things decide most of the difference between a 25-day run and a 60-day one.

    Why the industry clusters at all

    Cosmetics assembly is a light process with a heavy supply tail. A filled bottle is worth little until it has a cap, a pump, a label, a carton, a shrink wrap and a pallet, and each of those comes from a different specialist. When those specialists sit within a short drive of the filler, a missing component is a same-week problem. When they sit in another province, it is a three-week problem. Clustering is not about cheap labour; it is about the density of second-tier suppliers.

    Guangzhou and the Pearl River Delta

    The Delta — Guangzhou, Foshan, Dongguan, Shenzhen — is the densest cosmetics cluster in the country. Filling plants, tube and bottle moulders, pump and cap makers, label printers, carton converters and outer-box printers are all present within one metropolitan area. For a buyer this shows up as a practical advantage: a stock component can be substituted in days, a decoration change can be quoted without a new supplier, and a small first order can be filled without paying for a dedicated mould.

    It also sets a limit worth knowing. The cluster is deep in packaging and filling, less so in speciality actives, which usually arrive from specialist ingredient houses elsewhere. That split is normal and is why a factory will quote a formula and a component on different lead times.

    What the port decides

    Guangzhou and Shenzhen both have deep-water container terminals, and Hong Kong is close enough to be an alternative for air freight. The route matters less for cost than for rhythm: ocean freight from South China to Northern Europe or the US West Coast follows fixed sailing schedules, so a two-day slip at the factory can mean a two-week slip at the destination if it misses a sailing.

    This is the reason a 25-day production window is quoted as production, not delivery. The clock that matters to a distributor starts when the container is booked, not when the pallet is wrapped.

    What a cluster does not guarantee

    Proximity is not quality. Two factories on the same road can hold very different documentation: one with batch records, stability data and a documented allergen and preservative system, another with none of it. A buyer who selects on address alone is selecting on the least informative variable available.

    The cluster shortens logistics and component risk. It says nothing about formulation discipline, and nothing about who is legally responsible for the product in the destination market.

    How to use geography in a first order

    Ask three questions and the answers will tell you where the real constraint sits. Which components are held in stock and which are made to order? Which port, and which sailing schedule? If a component fails inspection, what is the replacement lead time? A supplier who answers all three concretely is working inside a cluster. A supplier who answers vaguely is either far from one or reselling.

    Two more questions are worth adding for a first order: whether the filler and the component supplier are in the same city, and how the factory handles a late component. Neither is a factory tour question. Both show up in the delivery date.

    Where FATAZEN sits

    Our filling and packing sit in Guangzhou, with components sourced inside the Delta. Production is quoted at a 25-day preparation after artwork and sample approval, FOB Guangzhou, with a 500-piece minimum per SKU. Private label, stock-formula labelling and repackaging are all handled from the same site, which is why a format change and a label change can be quoted together instead of sequentially.

    If you want the detail behind these terms rather than the summary, the factory page and the private label page set out the process step by step. For buyers comparing suppliers across regions, the useful comparison is not the country but the answers to the three questions above.

    Related reading

    Related articles

  • Building a Skincare Range: How Many SKUs for a First Year

    A first range usually fails for a boring reason: too many SKUs, each one too shallow. Five formulas in a hundred-piece run will outsell fifteen formulas in a fifty-piece run almost every time, because the money that went into range breadth never went into selling depth. This note sets out the arithmetic a buyer can run before placing an order, using the constraints that actually apply to a Guangzhou factory: 500 pieces per SKU as the standard minimum, and 25 days of preparation from the day artwork is approved.

    Start with the cash, not the range

    Multiply. Twelve SKUs at 500 pieces is 6,000 units before freight. Twenty-four SKUs is 12,000. That number is not a target; it is the size of the bet. Two costs follow it immediately: the goods themselves, and the warehouse space to hold them while they sell through.

    The second cost is the one buyers underestimate. A 12-SKU range occupying four shelf positions in a stockroom is easy to count and easy to reorder. A 24-SKU range spreads the same money across twice as many variants, which means the slow ones sit exactly as long as the fast ones, tying up cash that the fast ones need for a reorder.

    What 500 pieces per SKU actually costs you in time

    Sell-through is the number that decides whether a second order happens. If a single SKU moves 40 units a month, 500 pieces is twelve and a half months of stock. If it moves 150 a month, the same 500 pieces is under four months. Same order, very different business.

    That is why the useful question is not “how many SKUs can I launch with” but “how many SKUs can I support at the rate I expect them to sell”. A range of five that turns twice a year funds a sixth SKU from its own cash. A range of twenty that turns once ties the same money up for a year and leaves nothing for the winner.

    A workable first-year structure

    For a brand entering with its own label, five to eight SKUs is the range that tends to hold: one cleanser, one treatment, one moisturiser, one targeted product, and one or two body or hand items that carry a lower unit price and a faster repurchase cycle. A hand cream in a 50 ml tube fills that slot: the honey milk hand cream is a single-SKU example of the low-price, quick-repeat end of a range. That covers a routine without asking a buyer to commit to a full catalogue on faith.

    Depth matters more than count in the first year because a range is judged on its strongest shelf, not its average. Two well-selling formats give a distributor something to reorder; eight mediocre ones give them a reason to wait. If the range has to grow, grow it after the first reorder, when the sell-through data is real rather than projected.

    Where the count is decided for you

    Three constraints compress the choice before preference enters. The minimum per SKU sets the floor on cash. The 25-day preparation window sets how fast a reorder can land, which decides how thin you can afford to run before running out. And the format itself sets the realistic ceiling: a 100 mL tube and a 30 mL serum do not carry the same unit cost or the same shelf life once opened.

    Freight is the fourth. Consolidating several SKUs into one shipment is the main reason to launch a range at once rather than one product at a time, but consolidation only helps if the whole shipment sells. A single container of twelve SKUs and a single container of five cost similar money to move; only one of them is likely to be reordered inside a year.

    Phasing a range without losing the shelf

    Two launches a year is a workable rhythm: a core range first, then an extension once the first reorder has been placed. The extension can reuse the same packaging system, which keeps artwork work down and keeps the shelf visually consistent. It also means the second launch is funded by evidence rather than by a projection.

    If a market requires a minimum number of facings or a defined planogram, the count may be fixed from outside. In that case the answer is to concentrate the required count on the cheapest formats and the fastest repurchase cycles, not to spread it evenly across price points.

    Questions to settle before the first purchase order

    Four numbers decide the structure: expected monthly sell-through per SKU, the cash available for the first order, the storage capacity you can actually use, and the lead time you can tolerate between reorders. Write them down before choosing a range size. If the fourth number is tighter than 25 days plus transit, the range has to be smaller, because there is no way to compress the production window once artwork is approved.

    The same arithmetic applies whether the label is ours or yours. For how the order is structured under private label, see our private label programme. For the terms that govern minimums and lead times, the wholesale FAQ sets them out line by line, and this note on MOQ and lead time explains where each number comes from. Factory capacity and location are covered on our factory page.

    Related

  • Repackaging vs Private Label: Which One Fits Your Volume

    Two routes get a brand onto a shelf: repackaging goods that already exist, or having a range made under your own label. They look similar on a price list and behave very differently once volumes, timelines and liability are involved. This note sets out where the line falls, so the choice can be made on arithmetic rather than on preference.

    What each route actually is

    Repackaging means taking a finished product that is already manufactured and sold — often under a stock or house brand — and putting it into your own packaging, or over-labelling the existing pack. The formula, the fill and usually the container stay as they are.

    Private label means a product made for you: your brand on the pack, and depending on the arrangement your formula, your fragrance, your fill weight and your container. The factory runs it as your order rather than as stock.

    There is a middle route worth naming, because much of the confusion lives there: a stock formula in a stock container, but printed or labelled with your brand at a defined minimum. That is closer to private label on the compliance side and closer to repackaging on the cost side.

    The differences that actually cost money

    • Minimum quantity. Repackaging can start low because the goods already exist. Private label is bounded by the batch the line has to run — which is why a first order usually sits at a defined minimum rather than at whatever number you would prefer.
    • Artwork and approval. On a stock product the label is set. On your own label every element has to be written, checked against the destination market and approved before print. That work is real and it sits on your side of the table unless it is explicitly contracted out.
    • Time to first shipment. Repackaging moves within days if stock is available. Private label adds formula confirmation, samples, stability and compatibility work, print, then filling. The preparation window quoted for a private label run does not include the technical work that precedes it.
    • Who is responsible. Whoever places the product on the market carries the obligation, and in the EU and UK that means a named responsible person established in the market. Repackaging does not avoid this — it relocates the question, because re-labelling can make you the one placing it.
    • Exit cost. If repackaging stops working, you stop ordering. If a private label range stops working, you may be holding printed packaging with your brand on it, which has no resale value to anyone else.

    The label obligations themselves are set out in what must appear on a cosmetic pack, and the EU distributor requirements are covered in what an EU distributor must hold.

    Choosing on volume

    The decision usually turns on a single number: how many units you can commit to per run, and how confident you are that they will sell.

    Below a few hundred units per reference, repackaging is normally the only route that makes sense, because a private label batch would leave you holding stock you cannot move. Between a few hundred and a low four-figure run, the middle route — stock formula under your brand at the factory minimum — is often the practical answer: it buys brand presence without paying for development.

    Above that, private label starts to win on unit economics: the per-unit cost of development is spread across a real order, and you gain control of the things that differentiate a product — texture, fragrance, fill, container.

    A second number matters as much as the first: how many references. A range of twenty references at low volume each is a different problem from two references at high volume, and the cheapest route is usually to consolidate. This is worked through in how many SKUs to launch with (covered separately, since the arithmetic differs by category).

    What to ask before deciding

    • Can I see the exact formula and fill I would be repackaging, and is the container fixed?
    • At what quantity does the supplier switch from stock to a run made for me?
    • Who writes and approves the label copy, and against which market?
    • What technical work is required before a first private label shipment, and how long does it take?
    • If I move from repackaging to private label later, what changes — pack, formula, or both?
    • What do I own if the arrangement ends: artwork, plates, unused packaging?

    The last question is the one most often skipped, and the one that decides how expensive a wrong guess turns out to be.

    How the two routes meet

    They are not mutually exclusive. A common pattern is to open a market with repackaged or stock-formula goods, measure sell-through at low risk, then move the references that work onto a private label run. The information gained in the first phase — which reference sells, at what price, through which channel — is what makes the second phase’s minimum quantity a calculated commitment rather than a bet. A FATAZEN product sold in its own printed tube is the Floral Hand Cream.

    Our private label process describes what a first run involves, and the wholesale FAQ covers quantities, preparation time and terms. If you are preparing a first brief, how to write a private label brief a factory can quote sets out what the factory needs in order to price accurately rather than approximately.

    Related reading

  • Stability and Compatibility Testing, Explained for Buyers

    Stability and compatibility testing sits between a formula that works in a beaker and a product that is still the same product after a year on a shelf. Buyers meet it as a line on a quotation they are asked to approve, usually without knowing what it covers. This note explains what the two terms mean, what a report typically contains, and which questions are worth asking before a first order is scheduled.

    Two different questions

    Stability asks whether the product itself changes over time and under stress. Compatibility asks whether the product and its packaging change each other. They are tested separately because they fail separately: a formula can be perfectly stable in glass and fail in a pump because of what the pump releases, or the interaction can be fine while the emulsion separates on its own.

    A quotation that lists only one of the two is not necessarily incomplete — some suppliers test the combination in a single protocol — but it is worth asking which question the report actually answers.

    What stability testing looks at

    A stability programme normally combines accelerated conditions with real-time storage.

    • Accelerated heat. Samples held at elevated temperature for a defined period, checked at intervals. This is the fastest way to surface separation, viscosity change, colour drift and odour change.
    • Thermal cycling. Repeated free-thaw or hot-cold cycles, which mimic the transport a container actually experiences rather than a warehouse.
    • Real-time. Samples stored at ambient conditions for the declared shelf life, or for a shorter period supported by the accelerated data. This is the only test that speaks to the actual claim on the pack.
    • Light exposure where the pack is transparent or the formula is light-sensitive, which is common with botanical extracts and vitamin derivatives.

    What is measured is not only appearance. Viscosity, pH, colour, odour and — where relevant — preservative efficacy are tracked, because a product can look unchanged while its preservation margin has quietly gone.

    What compatibility testing looks at

    The pack is part of the product. Compatibility work checks migration from pack to formula, absorption into the pack wall, corrosion of the closure, and whether the dose the consumer gets stays constant across the life of the pack.

    This matters most where the pack is the differentiator: a dropper with a rubber bulb, a pump with a metal spring, an airless bottle, a jar with a metallised collar. Each introduces a material in contact with the formula for months. Two packs that look equivalent on a quotation can behave differently, which is why a change of pack after approval is a new test, not a cosmetic change.

    What a report usually contains

    A usable report names the formula version and the pack it was tested in, the conditions and durations, the test intervals, the parameters measured, and a conclusion against the intended shelf life. It should also state what was not tested — a report that covers 12 weeks accelerated and says nothing about real-time data is honest; one that implies both were done is not.

    Two things are worth checking before you accept it. First, that the pack in the report is the pack you are ordering, including the closure. Second, that the batch tested is representative of production rather than a lab sample made at a different scale — the step from lab to filling line is where viscosity and air content often change.

    Where the timeline fits

    Testing runs alongside production planning, not after it. Accelerated work needs weeks, real-time needs months, and the pack has to exist before compatibility can start. A first order scheduled on the assumption that testing happens in parallel with filling will usually move, because the label needs a shelf-life statement and the shelf-life statement needs the data.

    This is the same reason a sample approval should not be treated as the end of the technical phase: approving a sample confirms what the product is; stability and compatibility confirm that it will still be that product later. Our private label process sequences these steps before the print order, and the note on MOQ and lead time explains why the 25-day preparation window does not include them.

    Questions worth asking a supplier

    • Is the report for this formula and this pack, including the closure?
    • Accelerated only, or is there real-time data, and over what period?
    • Was the tested batch produced at production scale?
    • Which parameters were measured, and at which intervals?
    • What happens if we change the pack or the fragrance after approval?
    • Does the report support the shelf life we intend to print on the pack?

    None of these require a technical background to ask, and each of them changes what the answer is worth. Buyers who ask them before the print order tend to be the ones who do not discover a shelf-life problem at the port.

    Related reading

  • Exclusive Territory Agreements for Beauty Distributors: Key Clauses

    An exclusive territory clause is the single most negotiated paragraph in a distribution agreement, and the one most often left vague. Both sides usually agree in principle within one meeting, then spend three months on what the words actually commit them to. This note sets out the elements that a workable clause needs to cover, without arguing for either side.

    What the clause is actually buying

    A territory right is not a promise about profit. It is a promise about exposure: within a defined geography, the supplier will not appoint another distributor for the same range for the duration of the term. Everything else in the clause — minimum volumes, marketing duties, renewal — exists to balance that restriction against something the supplier receives in return.

    Suppliers rarely object to exclusivity as a concept. They object to exclusivity that costs them coverage: a distributor who holds a country but only services two cities has converted a right into a warehouse. That is why nearly every workable clause pairs the territory with a number.

    The six elements a clause needs

    In practice, a clause that can be enforced without a second meeting usually covers the following.

    • Geography, defined by a list, not an adjective. “Europe” is not a territory. A list of countries, or a customs union plus named exceptions, is. Where a country has overseas territories or free zones, say which are in and which are out.
    • Product scope. Skin care, hair care, or a named range with specific article numbers. A distributor holding exclusive rights to “the brand” and a supplier launching a new category three months later is a dispute waiting to be scheduled.
    • Channel scope. Retail, pharmacy, salon, e-commerce, marketplace resale, or export onward. The same country can be exclusive in pharmacy and open in marketplaces; if the clause stays silent, both sides will assume the version they prefer.
    • Minimum purchase, with a period. An annual figure is normal; quarterly or half-yearly checkpoints are more useful, because they surface a shortfall while there is still time to correct it. State the currency, the basis (ex-works or delivered), and whether it is measured on orders placed or goods shipped.
    • Term and renewal. An initial term, then a renewal mechanism tied to the minimum being met. Silence on renewal produces either an automatic rollover the supplier regrets or a renegotiation every twelve months.
    • Consequences, in order. What happens if the minimum is missed: a cure period, then loss of exclusivity while the account continues non-exclusively. Exclusivity is a right that can be stepped down; it does not have to end the relationship.

    The parts that get missed

    Three items come up after the main clause is signed, and are worth settling at the same time.

    Regulatory responsibility. In the EU and the UK, someone established in the market must carry the responsible person role, and that entity is named on the pack. Exclusivity does not create that obligation — it sits with whoever places the product on the market. Where the distributor takes that role, the clause should say so and say who pays for notification. The obligations themselves are set out in what an EU distributor must hold before selling.

    Marketing spend and brand use. A minimum spend or a named activity — a launch listing, a trade fair, a set number of doors — converts the exclusive right into something the supplier can point at. Trademark use should be licensed explicitly, with approval over how the brand appears.

    Parallel trade and online resale. If the agreement is silent, unauthorised sellers in the territory will be treated as the distributor’s problem by the supplier and as the supplier’s problem by the distributor. Decide the position, including whether the distributor may sell through marketplaces and under what name.

    How volume commitments are usually set

    The number is normally built bottom-up rather than negotiated as a single figure: doors targeted, units per door per month, a realistic sell-through rate, and a ramp that recognises the first quarter is stocking rather than selling. A first-year figure that assumes mature velocity is the most common cause of a missed minimum in year one.

    The arithmetic on the supplier side is production driven: minimum batch, preparation time, and whether the forecast can be produced in one run or needs to be spread. Our note on MOQ and lead time sets out how those two numbers interact, and the private label process covers what changes when a range is made under your own brand rather than supplied as ours.

    Before signing

    • Territory written as a list of countries, with free zones and overseas territories addressed.
    • Product scope tied to article numbers or a named range.
    • Channel scope explicit, including marketplaces.
    • Minimum purchase with currency, basis and checkpoints.
    • Term, renewal and the step-down mechanism if the minimum is missed.
    • Who holds the responsible person role, and who pays for notification.
    • Marketing commitment expressed as something countable.
    • Trademark licence and brand approval process.
    • Exit: notice period, stock in the pipeline, and what happens to artwork and labels.

    Both sides benefit from the same thing here: a clause specific enough that neither has to guess what the other meant in year two. Territory pages for buyers working through the regional picture are collected under distributors, including the Europe page, and commercial terms sit in the wholesale FAQ.

    Related reading

  • Label Compliance: The Fields That Must Appear on a Cosmetic Pack

    A cosmetic pack carries two very different kinds of text: what the brand wants to say, and what a regulator requires it to disclose. Buyers who are preparing a first private label order usually spend their time on the first and discover the second at the artwork proof, when changing a label means changing a print run. This note lists the elements that recur across markets, and where the rules genuinely diverge.

    The elements that appear almost everywhere

    Most jurisdictions converge on a small core. A pack normally has to identify the product, state the net quantity, list the ingredients, identify who is responsible for placing it on the market, and carry a way to trace the batch.

    • Product identity — what the item is, in terms a buyer can act on: a cream, a gel, a shampoo. The function wording is part of the identity, so it is also the first place where a claim problem tends to appear.
    • Net content — weight or volume in metric units. This must match the fill the factory actually runs; a label that says 100 ml on a 95 ml fill is a defect, not a rounding issue.
    • Ingredient list — in descending order of concentration down to 1%, then in any order below that. Colourants may be listed at the end under their CI numbers. Fragrance and preservatives are usually named by their INCI entries rather than grouped.
    • Responsible entity — a legal name and a postal address. Depending on the market this is the manufacturer, the importer, or a named responsible person.
    • Batch code — a mark that ties the unit to a production record. A date alone is not a batch code: two runs can share a date.

    If you are checking an ingredient list for the first time, the ordering rules are worth reading on their own — how to read a skincare ingredient list as a buyer walks through the 1% line and where fragrance and colour sit.

    Dates: two systems, not one

    There are two separate date concepts and they are often confused on artwork.

    A date of minimum durability applies to a product that will not stay in condition for more than 30 months. It is printed as day-month-year, or month-year for shelf life above 18 months, and is marked as best before.

    A period after opening applies instead when durability exceeds 30 months. It is the open-jar symbol with a number of months, and it describes the window after the consumer first opens the pack. A pack does not usually need both, and printing both invites a question at customs that nobody wants to answer twice.

    Where markets actually differ

    The core is similar; the edges are not. Three practical differences matter for a first order.

    Who is named. In the EU, a responsible person established in the EU must appear with a name and address, and the product needs a notification before it is placed on the market. In the UK, the equivalent is a UK responsible person and an SCPN submission. The full obligations for each are set out in what an EU distributor must hold and the UK SCPN and responsible person route.

    Language. Ingredient lists use INCI names regardless of market. Everything else — warnings, function, directions — is normally required in the official language or languages of the country of sale. A pack printed only in English cannot be sold in most of continental Europe without an overlabel.

    Warnings and restricted substances. Some ingredients carry mandatory warning text at given concentrations, and that text is prescribed rather than written by the brand. This is the part of the artwork that a factory cannot fix for you after printing: the sentence must be correct at proof stage.

    What the factory needs from you, and when

    Label work runs in parallel with filling, not after it. In practice the sequence is: formula and fill weight fixed, artwork drawn, label text checked against the destination market, print, then filling. Anything that changes after print becomes a reprint and a delay — which is why the practical advice is to lock the label copy before the print run, not before the shipment.

    Two things are worth settling early with the supplier:

    • Who approves the copy. Ask explicitly who checks the label text, and against which market. A factory that prints what it is sent is doing its job; it is not the one carrying the compliance question.
    • What is printed versus applied. A printed can and a labelled jar have different minimum quantities and different lead times. The same words cost different amounts depending on how they get onto the pack.

    Our own private label process puts the copy review before the print order for this reason, and the commercial side of a first run — quantities, preparation time, terms — is set out in the wholesale FAQ.

    A short pre-print checklist

    1. Product identity and function wording agreed, with no claim that cannot be substantiated.
    2. Net content matches the actual fill.
    3. Ingredient list in correct order, colourants at the end where applicable.
    4. Date system chosen: durability date or period after opening, not both by default.
    5. Responsible entity name and postal address for the destination market.
    6. Batch code allocated and space reserved for it on the pack.
    7. Warnings present for any ingredient that carries a mandatory statement.
    8. Language matches the country of sale.
    9. Artwork approved by whoever carries the compliance obligation.

    None of these are difficult individually. The cost comes from finding one of them after the labels are printed — a reprint plus a missed loading date is usually more expensive than the entire label run. For distributors working through several markets, the same checklist repeated per destination is the cheapest form of risk control available.

    A FATAZEN pack you can compare field by field is the Rose Hydrosol.

    Related reading