Incoming Goods Check: Counting and Opening a Delivery

A delivery is checked twice: once against the documents before the pallets are opened, and once against the batch itself before anything is signed. Factories that skip the first step discover shortages weeks later, when the cartons have already been broken down and nobody can prove what arrived.

Count cartons before you open them

The packing list states the number of cartons, the units per carton and the gross weight. Count cartons against that list on the dock, with the driver present. If the count differs, note the difference on the delivery receipt before signing and photograph the pallet as it stands. A signature without a note is treated as acceptance of the full quantity.

Check the seal number on a full container against the number on the bill of lading. A broken or replaced seal is a transit issue, not a manufacturing one, and the claim runs against the carrier rather than the factory.

Check the outside before the inside

Look for crush damage, water staining, and cartons that have been re-taped. Water damage on a cosmetics carton usually means the inner units are affected even when the outer box looks sound, because paperboard wicks moisture along the base. Photograph the pallet, the damaged carton and the affected units in one frame so the three can be matched later.

Match the batch number to the documents

Every carton should carry a batch code. The same code must appear on the certificate of analysis and on the unit label. Pick three cartons from different positions on the pallet rather than the first three in the row — a mixed pallet is exactly what a positional check misses. If the codes differ, stop counting and ask before opening more.

This is the point where a delivery that looks fine becomes a documented problem, and where the batch record described in how a batch complaint is checked starts.

Open a sample, not a pallet

A workable sample for a first delivery is a few units from each batch, opened and inspected against the approved sample: label position, cap fit, fill level, print legibility, and the presence of the batch code and net content. Record what was checked and what was found, with the date and the initials of the person checking.

The inspection at this stage is not the same as the pre-shipment inspection. The AQL inspection before shipment samples the production lot at the factory; receiving inspection samples what survived the journey.

Write down what does not match, while the pallet is still intact

Three facts make a claim possible: the quantity that differs, the batch code affected, and photographs taken before the cartons were broken down. Without the third, a shortage claim becomes a conversation about who counted what. The claim route itself is set out in short shipment claims before a reorder.

Decide what happens to the affected units

There are only three outcomes worth agreeing in advance: hold the units pending a decision, return them, or release them with a credit against the next order. Quarantine the affected cartons in a marked area so they cannot be picked into an outgoing order while the question is open. A unit that has been sold cannot be inspected, returned or credited.

Close the loop with the next order

The receiving record is only useful if it changes something. If a carton count was wrong, the packing process needs a second check; if labels were misaligned, the artwork file and the printing plate need review before the next run. Note the change in the purchase order for the next delivery so the same check is repeated deliberately rather than by memory.

Buyers ordering for the first time can confirm packing and document conventions on the wholesale FAQ, and private label orders can agree the receiving checks with the factory before production through the private label process. What the factory keeps on file is covered under our factory.

What the receiving file should contain

Keep the signed delivery receipt with any noted difference, the packing list, the photographs, the sample record with batch codes, and the quarantine note if units were held. Four pages, filed by delivery date, answer every question a supplier or a forwarder will ask later, and they are the first thing a buyer should be able to produce in a dispute.

Related

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *